Managing the Unit
- 17 Articles
- Updated on Nov 29, 2024
- Published on Sep 25, 2024
The Management Web Interface provides secure access, via an SSL client, to all system control, management and monitoring functions.
The management station is the computer that you use to connect to the management Web interface; it must be equipped...
- Updated on Jul 28, 2026
- Published on Dec 15, 2021
Physical Connection to the Unit
The first time you connect to the unit before logging in, you must connect the LAN port on the management station to the management port on the front of the unit. This allows you to log in and configure the unit for...
- Updated on Aug 8, 2025
The SSL protocol is used to secure communication over the Internet between the management station and the device. For secure communication, a valid SSL certificate from a certificate authority must be imported into the device.
To learn more about ...
- Updated on Aug 7, 2025
- Published on Jul 31, 2025
A Trusted Root Store (TRS) is a set of root certificates that are trusted by operating systems, browsers, and other software to establish trust in digital certificates. Cisco provides certain TRS bundles to set up the default trusted Certificate Aut...
- Updated on Feb 6, 2026
- Published on Oct 28, 2021
You can define one or more logical interfaces for managing the unit; the types of interfaces available include standard IPv4 or IPv6, bridges and VLANs. Once the interface is defined, you can also define a route to access the unit from outside the u...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
The equipment provides ping and traceroute functions to help administrators troubleshoot network problems.
Use the ping function to verify whether a specific host (IP address) is reachable.
Note: Ping can be used to reach a logical interfa...
- Updated on Nov 23, 2022
- Published on Oct 28, 2021
The unit provides a serial (RS232) console port (RJ45) to manage the equipment using a serial port on a management station. After logging in, you can enable or disable the console port.
To enable or disable the console port
Access the page...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
Link Layer Discovery Protocol (LLDP) is a protocol that allows stations attached to an IEEE 802 LAN to advertise to one another. Three types of information are advertised: the major capabilities provided by the system incorporating that station, the...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
The unit’s management system provides multiple configurable management sessions to allow multiple users to control the unit.
To view current sessions, access the page System ▶Session ▶Management .
System ▶Session ▶Management
For more info...
- Updated on Aug 13, 2025
- Published on Oct 28, 2021
You can configure each unit to be managed by several users, each having different privileges. Privileges, also referred to as permissions, are used to grant precise levels of access to different user groups. You may choose to limit certain users to ...
- Updated on Aug 13, 2025
- Published on Jul 31, 2025
You can change your password from the Management Web Interface .
To change your password:
Navigate to System ▶ Session ▶ Password .
In Change your password , complete the parameters:
Current Password : Enter your current password.
...
- Updated on Aug 13, 2025
- Published on Jul 31, 2025
Users with appropriate permissions can configure the password policy for logging in to a device.
To configure the password policy
Navigate to System ▶ Session ▶ Password Policy .
In Password Policy Configuration , do one of the following...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
You can use a RADIUS server for authenticating users. When RADIUS authentication is enabled, the unit supports Authentication and Authorization as configured on the RADIUS server. A RADIUS server can be useful if you want to centrally manage user ac...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
You can use a TACACS+ server for authenticating users. When TACACS+ authentication is enabled, the unit supports Authentication and Authorization as configured on the TACACS+ server. A TACACS+ server can be useful if you want to centrally manage use...
- Updated on Jul 31, 2025
- Published on Dec 15, 2021
You may use an Access Control List (ACL), which is a network access control mechanism, to prevent or allow specific MAC or IP addresses to access the unit for management purposes.
You can create up to 10 lists and each list can contain up to 40 ru...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
Access the System ▶OS Service page to:
Show available OS services
Show and edit the HTTP server configuration
To change the HTTP Server configuration
Access the page System ▶OS Service , the current HTTP Server configuration is ...
- Updated on Jul 31, 2025
- Published on Oct 28, 2021
The Yet Another Next Generation (YANG) models are stored on the device as part of the firmware package. In order to retrieve them the user must use a NETCONF tool, for instance:
SSH console
Tools from Cisco orchestrator (e.g.: Yang Explorer): ...