--- title: "View Dry-Contact Alarms" slug: "viewing-dry-contact-alarms-lt" tags: ["alarm", "Assurance Sensors", "Assurance Sensor LT-S"] updated: 2026-07-07T13:59:29Z published: 2022-03-30T14:51:46Z canonical: "docs.crossworkassurance.cisco.com/viewing-dry-contact-alarms-lt" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # View Dry-Contact Alarms **To view the status of dry-contact-related alarms** 1. Access the page **System ▶Alarm ▶Dry-Contact** The dry-contact alarm status is displayed for each of the unit's inputs. For more information on specific parameters, refer to the following table. **Dry-Contact Alarms (System ▶Alarm ▶Dry-Contact)** | Parameter | Description | | --- | --- | | Operational State | The current state of the dry-contact input, i.e. **Enabled** or **Disabled**. When enabled, the alarm point for this input is created and the input is monitored. | | Normal Input State | The input's normal state, i.e. **Closed** or **Opened**. An alarm is raised when the input state of the dry-contact is different from the normal state for more than three consecutive samples. | | Input Pin State | The current state of the dry-contact input. | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)