---
title: "View Delay Measurement Results"
slug: "viewing-delay-measurements-results"
tags: ["CFM", "DMM", "results", "sensor control ", "Assurance Sensor Control"]
updated: 2026-07-07T13:56:03Z
published: 2025-07-31T19:07:04Z
canonical: "docs.crossworkassurance.cisco.com/viewing-delay-measurements-results"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# View Delay Measurement Results

**To view delay measurement results details**

1. Access the page **SOAM ▶ CFM ▶ DMM ▶ Results**.

The results for all Delay Measurement Instances are displayed.

**Note**: For more information on how delay measurements results are calculated, refer to "Setting Up Delay Measurements".
2. Click the **Index** of the DMM instance you want to view the DMM results.

For more information on specific parameters, refer to the following tables.

**DMM Results (SOAM ▶ CFM ▶ DMM ▶ Results)**

| Parameter | Description |
| --- | --- |
| Index | The index of the delay measurement instance |
| Name | The name of the delay measurement instance |
| MEP Index MEP idx | The index assigned to the Maintenance association End Point |
| MEPID | The local MEP's Maintenance association End Point Identifier |
| Remote MEPID R-MEPID | The remote MEP's Maintenance association End Point Identifier |
| Priority | The priority value used in VLAN tags, if present, in the transmitted frame |
| Period | The number of periods that elapsed since measurement started |
| Period Time | The time when the previous period was completed |
| Result Codes | The current value, expressed in microseconds, for DMM results: - **OAD**: One-Way Average Delay - **OADV**: One-Way Average Delay Variation - **TAD**: Two-Way Average Delay - **TADV**: Two-Way Average Delay Variation |
| Op Status | The DMM operational status code. Valid values are: - **INAC**: Feature is inactive - **UNLK**: Remote device is unlinked - **WAPP**: Waiting for an application that supports the DMM to become active - **PROG**: Remote device is currently being programmed - **FAIL**: Remote device has encountered a failure - **ACT**: Remote device is active and fully functional |

**One-Way Delay**

| Parameter | Description |
| --- | --- |
| Average Alarm | Indicates whether an alarm is raised (**Active**) because the current average one-way delay is greater than or equal to the average threshold |
| Instantaneous Alarm | Indicates if an alarm has been raised (**Active**) because the instantaneous threshold has been reached. This threshold is the consecutive number of times the one-way delay was greater than or equal to the maximum value. |
| Instantaneous Delay | The one-way instantaneous delay, expressed in microseconds |
| Period | Gives the results for the **previous** and **current** periods The previous period is indicated in **Period Time**. |
| Nbr Samples | Total number of samples in the period |
| Minimum Delay | The minimum delay, expressed in microseconds, over one period |
| Maximum Delay | The maximum delay, expressed in microseconds, over one period |
| Average Delay | The average delay, expressed in microseconds, over one period |
| Nbr Threshold Exceeded | Number of times the one-way delay exceeded the value of the **Maximum Delay** parameter |

**One-Way Delay Variation**

| Parameter | Description |
| --- | --- |
| Average Alarm | Indicates if an alarm has been raised (**Active**) because the current average one-way delay variation is greater than or equal to the average threshold |
| Instantaneous Alarm | Indicates if an alarm has been raised (**Active**) because the instantaneous threshold has been reached. This threshold is the consecutive number of times the one-way delay variation was greater than or equal to the maximum value. |
| Instantaneous DV | The one-way instantaneous delay variation, expressed in microseconds |
| Period | Gives the results for the **previous** and **current** periods The previous period is indicated in **Period Time**. |
| Nbr Samples | Total number of samples in the period |
| Minimum DV | The minimum delay variation over one period, expressed in microseconds |
| Maximum DV | The maximum delay variation over one period, expressed in microseconds |
| Average DV | The average delay variation over one period, expressed in microseconds |
| Nbr Threshold Exceeded | Number of times the one-way delay variation exceeded the value of the **Maximum DV** parameter |

**Two-Way Delay**

| Parameter | Description |
| --- | --- |
| Average Alarm | Indicates whether an alarm is raised (**Active**) because the current average two-way delay is greater than or equal to the average threshold |
| Instantaneous Alarm | Indicates if an alarm has been raised (**Active**) because the instantaneous threshold has been reached. This threshold is the consecutive number of times the two-way delay was greater than or equal to the maximum value. |
| Instantaneous Delay | The two-way instantaneous delay, expressed in microseconds |
| Period | Gives the results for the **previous** and **current** periods The previous period is indicated in **Period Time**. |
| Nbr Samples | Total number of samples in the period |
| Minimum Delay | The minimum delay, expressed in microseconds, over one period |
| Maximum Delay | The maximum delay, expressed in microseconds, over one period |
| Average Delay | The average delay, expressed in microseconds, over one period |
| Nbr Threshold Exceeded | Number of times the two-way delay exceeded the value of the **Maximum Delay** parameter |

**Two-Way Delay Variation**

| Parameter | Description |
| --- | --- |
| Average Alarm | Indicates if an alarm has been raised (**Active**) because the current average two-way delay variation is greater than or equal to the average threshold |
| Instantaneous Alarm | Indicates if an alarm has been raised (**Active**) because the instantaneous threshold has been reached. This threshold is the consecutive number of times the two-way delay variation was greater than or equal to the maximum value. |
| Instantaneous DV | The two-way instantaneous delay variation, expressed in microseconds |
| Period | Gives the results for the **previous** and **current** periods The previous period is indicated in **Period Time**. |
| Nbr Samples | Total number of samples in the period |
| Minimum DV | The minimum delay variation over one period, expressed in microseconds |
| Maximum DV | The maximum delay variation over one period, expressed in microseconds |
| Average DV | The average delay variation over one period, expressed in microseconds |
| Nbr Threshold Exceeded | Number of times the two-way delay variation exceeded the value of the **Maximum DV** parameter |

**© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)