--- title: "Use the Serial Console" slug: "using-the-serial-console-lx" tags: ["console", "Assurance Sensors", "Assurance Sensor LX-S"] updated: 2026-07-07T14:05:52Z published: 2022-11-23T18:07:23Z canonical: "docs.crossworkassurance.cisco.com/using-the-serial-console-lx" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Use the Serial Console The unit provides a serial (RS232) console port (RJ45) to manage the equipment using a serial port on a management station. After logging in, you can enable or disable the console port. **To enable or disable the console port** 1. Access the page **System ▶ Configuration ▶ Console**. 2. Verify the current state of the console port in the **Console State** field. 3. Click **Enable Console** or **Disable Console** as required. The console port provides a CLI interface to the unit. Refer to the CLI Command Guide for information on how to use the CLI. To use the console port, you must use a terminal emulation program with the following settings: **Terminal Emulation Settings** | Parameter | Setting | | --- | --- | | Protocol | Serial | | Port | COM 1 to 8 | | Baud Rate | 115200 | | Data Bits | 8 | | Parity | None | | Stop Bits | 1 | | Flow Control | None | You can connect the serial port on the management station to the RJ45 console port on the unit using the following diagrams and table. **Serial Console Cable Connectors** ![Skylight element LX v7.9_3.bmp](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/Skylight%20element%20LX%20v7.9_3.bmp?sv=2026-02-06&spr=https&st=2026-11-16T05%3A58%3A16Z&se=2026-11-16T06%3A58%3A16Z&sr=b&sp=r&sig=DRac2txOtugefRE9NbazPYiAL5FPsWKnxz%2BM2Sdizh8%3D) ### Console Port Cable Pinouts **Unit Console Port (RJ45)** | Pin | Signal | | --- | --- | | 1 | Not connected | | 2 | Not connected | | 3 | Tx data | | 4 | Ground | | 5 | Ground | | 6 | Rx data | | 7 | Not connected | | 8 | Not connected | **Management Station Serial Port (DB9)** | Pin | Signal | | --- | --- | | | Not connected | | | Not connected | | 2 | Rx data | | 5 | Ground | | 5 | Ground | | 3 | Tx data | | | Not connected | | | Not connected | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)