--- title: "Loopback Testing Overview" slug: "understanding-loopback-testing-gt" tags: ["loopback", "Assurance Sensors", "Assurance Sensor GT", "Assurance Sensor GT-S", "Assurance Sensor LT-S", "Assurance Sensor LX-S"] updated: 2026-07-06T20:32:39Z published: 2026-01-27T18:33:12Z canonical: "docs.crossworkassurance.cisco.com/understanding-loopback-testing-gt" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Loopback Testing Overview Layer 1–4 loopbacks (MAC address, IP address, and port swapping) enable remote QoS testing for Ethernet, IP/MPLS, and triple-play services. You can establish a loopback by using any of the following parameter combinations: - Source or destination address - TCP/UDP port - Service level You can run loopbacks in-band or out-of-band so that customer traffic continues to flow while you test selected streams. ![1.bmp](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/1%287%29.bmp?sv=2026-02-06&spr=https&st=2026-11-16T06%3A18%3A26Z&se=2026-11-16T07%3A18%3A26Z&sr=b&sp=r&sig=OWnVwfTvqFGiSptvJTI%2FfWIefx5JPXsNARCbMvMOQSY%3D) The device supports the following loopback types: - **Local (private) loopback**—Loops back all traffic that matches the configured loopback type (Iometrix L1, EXFO L2, EXFO L3, or Custom). - **Remotely controlled loopback**—Loops back traffic when the unit receives a predefined frame type (JDSU/Acterna™, Sunrise™). **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)