--- title: "Test Redundancy" slug: "testing-redundancy" tags: ["redundancy", "Hot Standby Redundancy", "Docker", "Redundancy Test", "Legacy Orchestrator", "admin"] updated: 2026-07-07T13:33:48Z published: 2025-02-14T20:21:52Z canonical: "docs.crossworkassurance.cisco.com/testing-redundancy" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Test Redundancy After the redundancy feature has been configured, enabled and started, you can check that it is operating normally with the redundancy test command. This command is executed from the appliance console. For more information about the appliance console, see *Accessing the Appliance Console*. 1. Ensure that redundancy is started by entering: ``` redundancy show status ``` 1. Run the test by entering: ``` redundancy test ``` The output of the test will be similar to the following: ![testing Redundancy ouput.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/testing%20Redundancy%20ouput.png?sv=2026-02-06&spr=https&st=2026-11-22T22%3A10%3A25Z&se=2026-11-22T23%3A10%3A25Z&sr=b&sp=r&sig=4NIPHpVsc8FHg2zqaoC24nEXtssXp%2F%2BFmaW4D3YGCLI%3D) **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)