---
title: "SFP Configuration"
slug: "sfp-configuration-gt"
tags: ["SFP", "Assurance Sensors", "Assurance Sensor GT", "Assurance Sensor GT-S"]
updated: 2022-03-30T20:23:23Z
published: 2022-03-30T20:23:23Z
canonical: "docs.crossworkassurance.cisco.com/sfp-configuration-gt"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# SFP Configuration

**To change speed manually**

1. Access the page **Port ▶SFP ▶Configuration**.
2. Select the desired connector to obtain the detailed dialog: SFP-X Configuration.
3. Clear the **Automatic** check box if selected. (This option is selected by default.) The three speed options appear.
4. Select the appropriate option.
5. Click **Apply**.

For more information on specific parameters, refer to the following table.

**Port ▶SFP ▶Configuration**

| Parameter | Description |
| --- | --- |
| Present | An indication of whether or not the SFP is present. Available options are: - **Green:** The SFP is present - **Red:** The SFP is not present |
| Connector | The physical connector used by the port |
| Speed | The speed supported by the SFP - **Automatic:** Allows the SFP port to operate at the best speed determined via auto-detection. Clear this box to manually select a speed for this SFP. - **100 Mbps/1 Gbps:** Forces the SFP port to operate at the selected speed. ***Note:** The available override speeds are dependent on the model.* - Each optical SFP port can operate at the 100 Mbps supported on all SFP ports. |

**© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)