--- title: "Set Up VSP" slug: "setting-up-vsp-gt" tags: ["VSP", "CFM", "results", "Assurance Sensors", "Assurance Sensor GT", "Assurance Sensor GT-S"] updated: 2022-04-15T15:49:40Z published: 2022-04-15T15:49:40Z canonical: "docs.crossworkassurance.cisco.com/setting-up-vsp-gt" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting Up VSP The VSP function is used to reflect VSP (vendor-specific) frames to the sender. --- ***Note:** This function is to be used only with VSP when connecting to Layer-2 VSP actuator devices.* --- **To set up the VSP function** 1. Access the page **SOAM ▶CFM ▶ VSP ▶Configuration**. 2. Complete the required fields, then click **Apply**. For more information on specific parameters, refer to the following table. **VSP Configuration (SOAM ▶CFM ▶VSP ▶Configuration)** | Parameter | Description | | --- | --- | | Enable | The state of the instance (disabled by default). | | MEG Level | The MEG level of the reflector: - Frames with the MEG level equal to this setting are **reflected**. - Frames with the MEG level *higher than* this setting are **forwarded**. Range: All, 0–7 ***Note:** When All is selected, all frames are reflected.* | ### Viewing VSP Results **To view VSP Results** 1. Access the page **SOAM ▶CFM ▶ VSP ▶Results**. Current VSP results are displayed. For more information on specific parameters, refer to the following table. **VSP Results (SOAM ▶CFM ▶ VSP ▶Results)** | Parameter | Description | | --- | --- | | Index | The index assigned to the VSP instance. | | Src Mac | The MAC address for the remote unit (the source). | | Dst Mac | The MAC address for this unit's reception port (the destination). | | VLAN ID | The VLAN ID of the VSP frames received. | | MEG Level | The MEG level of the VSP frames received. | | Rx Count | The number of VSP frames received. | | Tx Count | The number of VSP frames reflected. | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)