--- title: "Set Up Link Trace Messages" slug: "setting-up-link-trace-messages-lt" tags: ["trace ", "CFM", "MEP", "Assurance Sensors", "Assurance Sensor LT-S"] updated: 2026-07-07T13:35:47Z published: 2024-01-24T21:36:17Z canonical: "docs.crossworkassurance.cisco.com/setting-up-link-trace-messages-lt" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Set Up Link Trace Messages Link Trace Messages (LTM) are multicast frames transmitted by a MEP to track the path (hopby- hop) to a destination MEP. Each receiving MEP sends a trace route reply directly to the originating MEP, and regenerates the trace route message. LTM are discussed in IEEE 802.1ag. **To start the link trace messages** 1. Access the page **SOAM ▶CFM ▶MEP ▶LTM**. All existing link trace information for Maintenance association End Points is displayed. 2. Click the **MEPID** of the MEP for which you want to start the LTM. 3. Complete the required fields, then click Start. For more information on specific parameters, refer to the following table. **MEP Link Trace (SOAM ▶CFM ▶MEP ▶LTM)** | Parameter | Description | | --- | --- | | MEP Index | Index of the Maintenance association End Point. | | MEPID | Maintenance association End Point Identifier. | | Target Type | Link trace target by remote **MEPID** or **MAC address**. | | Remote MEPID R-MEPID | Targeted remote MEPID. The remote MEP MAC address is resolved into the local MEP database. | | LTR Received | The number of link trace responses received by this MEP. | | MAC Address | Target MAC address. Only unicast MAC addresses are valid for link trace target address. | | TTL | Link trace time to live. Range: 0–255 If it is initially set to 0, no response should be received. | | Set FDB Only Flag | Enables the LTM to set the flag "UseFDBonly" (IEEE 802.1ag) or the flag "HWonly" (Y.1731). | **Bottom of Table** | Parameter | Description | | --- | --- | | LTM Sequence Number Next Seq. # | Sequence number used by the latest link trace request initiated from that MEP. | | Target MAC Address Target MAC | Target MAC address used by the latest link trace request. | | TTL | Link trace time to live received in link trace responses. | | F | Forwarded. Indicates that the responder maintenance point did forward the LTM. | | T | Terminal MEP. Indicates that the responder maintenance point is a MEP. | | Action | Indicates how the responder system processes frames targeted for the destination address specified by the LTM Possible values are: - **RlyHit:** The LTM reached a maintenance point whose MAC address matches the target MAC address. - **RlyFDB:** The Egress Port was determined by consulting the Filtering Database. - **RlyMPDB:** The Egress Port was determined by consulting the MIP CCM Database. | | TLV Type | Indicates which Type Length Values (TLVs) are included in link trace responses. | | TLV Value | The TLV values included in link trace responses. | ### Viewing Link Trace Messages Information **To view the link trace message information** 1. Access the page **SOAM ▶CFM ▶MEP ▶LTM**. 2. Click the **MEPID** of the MEP for which you want to view LTM information. For more information on specific parameters, refer to the "MEP Link Trace (**SOAM ▶CFM ▶ MEP ▶LTM**)" table. **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)