--- title: "Reboot the Unit" slug: "rebooting-the-unit-lx" tags: ["reboot", "firmware", "Assurance Sensors", "Assurance Sensor LX-S"] updated: 2024-01-23T17:57:00Z published: 2024-01-23T17:57:00Z canonical: "docs.crossworkassurance.cisco.com/rebooting-the-unit-lx" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Rebooting the Unit Rebooting the unit is required in order to apply certain types of modifications made to the unit's configuration. You must also reboot after importing new configuration values. --- ***CAUTION:** Rebooting a unit is disruptive. It applies changes in the unit’s configuration and affects current operations.* --- **To reboot the unit** 1. Access the page **System ▶Maintenance ▶Firmware**. 2. Click the **Reboot** button. **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)