--- title: "Manage Users and Privileges" slug: "managing-users-and-privileges-lx" tags: ["management", "admin", "user role", "Assurance Sensors", "Assurance Sensor LX-S", "25.07"] updated: 2026-07-06T20:36:16Z published: 2025-08-13T20:27:51Z canonical: "docs.crossworkassurance.cisco.com/managing-users-and-privileges-lx" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Manage Users and Privileges You can configure each unit to be managed by several users, each having different privileges. Privileges, also referred to as permissions, are used to grant precise levels of access to different user groups. You may choose to limit certain users to only specific configuration options, such as firmware updates, ports, etc., while others have full access to all features. **Note:** You must define the permissions to assign to user groups before defining the user accounts. ### Setting Up the Administrator Account **Note:** To prevent losing administrator access to the unit, you cannot modify the administrator account privileges or delete the administrator account. **CAUTION:** If you, as the administrator, forget your username or password the only way to regain access to the management Web interface is to perform a factory reset. Refer to Restoring Factory Default Settings. ### Defining Permissions for a Group of Users You must first define a permission group before you can assign users to groups. **To define privileges and sub-privileges in a permission group** 1. Access the page **System ►Session ►Permissions**. 2. Click **Add** or click the **Group Name** that you want to edit. 3. Select the **Privileges** to assign to the permission group, then click **Apply**. **Notes:** A "+" sign that precedes the privilege name indicates the availability of subprivileges. Clicking on the "+" will show you the available sub-privileges that can be added or revoked.* You cannot change the privileges of user group Admin. This user group has full access to all functions. For more information on specific parameters, refer to the following table. **Group Privileges (System ►Session ►Permissions)** | Parameter | Description | | --- | --- | | Group Name | The name of the user permission group. | | Privileges | The privileges given to the user permission group allow its members to edit, add or enable within these sections. The following commands can be used by all users regardless of their privileges: - board - date - exit - help - ping - quit - sfp - syntax - tcp-connect - traceroute - version **ACL:** Edit/Enable ACL settings. **Alarms:** Edit/Add/Enable alarm reporting configurations. **CFM:** Edit/Add the SOAM CFM feature. **Config:** Import/Export configuration files through CLI. **Filters:** Edit/Add Layer-2 filters, IPv4 filters and VLAN: **Firmware:** Upgrade the firmware. Sub-privileges are available for upgrade and rollback. **Flow:** Add/Delete/Edit flow configurations - Flow - flow broker **History:** Edit the history bucket statistics. **L2PT:** Edit/Add L2 protocol tunneling rules. **Log:** Edit syslog configuration and view logged entries. **Loop Detection:** Edit/Add/Delete/Enable instance loop detection **Management:** Edit/Add management access to the unit: - bridge - console - dns - gps - interface - inventory - license - mode admin - motd - mtr - ntp - ptp - route - sfp - snmp - snmp-trap **OAM:** Edit/Add/Enable OAM and loopback - loopback - oam **PAA:** Add/Edit/Enable the performance assurance agent instances. **Policies:** Edit/Add/Enable policies for filtering traffic. **Port:** Edit/Add/Enable port configurations - cable-test - media-selection - port - statistics - fault-propagation Sub-privileges is available for **internal loopback**. **Protection:** Add/Edit/Enable protection: - LACP - ERP **RFC-2544:** Add/Edit/Enable the RFC-2544 menu. **SAT-Protocol:** Edit/Add/Enable Service Activation Testing protocol. **SAT Reporting:** Edit/Enable Service Activation Testing reporting. **Service Availability:** Add/Edit/Enable the service availability instances. **Service Mapping:** Add/Edit CoS profiles and bandwidth regulator sets : - bandwidth-regulator - cos-profile - regulator-set **Sessions:** Manage sessions and edit session configuration: - RADIUS - TACACS+ - reboot - session Sub-privileges is available for **reboot**. **Shaping:** Add/Edit traffic shapers database. **Traffic:** Edit/Enable VLAN level and Working Rate settings from the Traffic configuration **TWAMP:** Edit/Enable TWAMP Reflector settings. **Users:** Edit/Add and manage user accounts and permissions: - permission-group - user **Virtual Connection:** Add/Delete/Enable/Edit/Show vce configuration **Y.1564:** Edit/Add/Enable Y.1564 test methodology. **All-add:** Permission to add in all sections that are viewable **All-edit:** Permission to edit in all sections that are viewable **All-enable:** Permission to enable in all sections that are viewable | ### Adding and Editing User Accounts **To add or edit a user account** 1. Access the page **System ▶Sessions ▶Users**, a list of all user accounts that have been created for the unit is displayed. 2. Click **Add** or click a **User Name** if you want to edit a user account. 3. In the **[User name]** user settings page, complete the fields, then click **Apply**. For more information on specific parameters, refer to the following table. **User Settings (System ▶Session ▶Users)** | Parameter | Description | | --- | --- | | User Name | The login name for the account. | | First Name | The account holder's first name. | | Last Name | The account holder's last name. | | Phone Number | The account holder's phone number. | | Email Address / Email | The account holder's email address. | | Password | Enter the password for this account. ***Note:** Passwords for locally-authenticated users are limited to 128 characters as of release 7.9.5 (previous limit of 31 characters).* | | Confirm Password | Re-enter the password for this account. | | Password policy | Allows the administrator to assign or exempt the given user from the password policy. Select from these options: - **default** - **none** (default selection) **Note:** Administrators can run the `user add {username} [password-policy {name}]` CLI command to assign/exempt the given user from the password policy. | | Password remaining lifetime | Displays the password remaining lifetime (days) when the password policy is assigned **default** and with a valid password policy expiration configuration. **Note:** Administrators can run the `user show {username} password-status` CLI command to show the user's remaining password expiration time. | ### Reset the User Password **▶ To reset a user password:** 1. Access the page **System ▶ Session ▶ Users**. A list of all user accounts that have been created for the unit is displayed. 2. In **User name**, click the user name of the user. 3. In the **[User name] user settings** page, click **Reset password**. Reset the User Password via the CLI You can reset the password for a user via the CLI by using the command `user edit {username} [reset-password]`. ### Administering User Account Privileges You can grant different privileges or permissions to each user account if you have already defined both the user account and permission groups. **CAUTION:** Modifying or reassigning the user groups for your account may result in you being unable to perform some tasks.* **To give privileges to a user account** 1. Access the page **System ▶Sessions ▶Users**. 2. Click the user name that you want to edit. 3. In the **[User Name]** user settings page, click the **Permission** button, the user's **User Permission** page is displayed. All available user permission groups are listed. **Note:** You can create more groups in the **Session ▶Permissions** page. 4. Select the user groups that you want to assign to this user, then click Apply. **Note:** You cannot change permission group of the user admin. ### Changing Passwords **To change a user's password** 1. Access the page **System ▶Sessions ▶Users**. 2. Click the user name that you want to edit. 3. Enter the user's new password in both the **Password** and **Confirm Password** fields, then click **Apply**. **Note:** If you forget your username or password, contact your Administrator for a password reset. **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)