--- title: "Manage Syslog Messages (Assurance Sensors)" slug: "managing-syslog-messages-assurance-sensors-1" tags: ["syslog", "management", "Assurance Sensors", "Assurance Sensor GT", "Assurance Sensor GT-S", "25.07", "Assurance Sensor LT-S", "Assurance Sensor LX-S"] updated: 2026-07-07T13:52:55Z published: 2025-08-11T18:32:31Z canonical: "docs.crossworkassurance.cisco.com/managing-syslog-messages-assurance-sensors-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Manage Syslog Messages (Assurance Sensors) Syslog (System Logging) collects local events and notifications from different applications in a structured form and then stores them in a database in chronological order. The syslog database can be used to analyze and diagnose software or hardware malfunctions. Messages are reported into the system logger and they are kept or removed depending on the system logger level. The system logger also supports remote logging. You can send messages to an external computer. ## View System Logs **To view system logs:** 1. Navigate to **System ▶ Agent ▶ Syslog**. In **Syslog**, system log entries display. 2. (Optional) Click **Refresh** to update to the latest messages. ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-PDB2BVNG.png?sv=2026-02-06&spr=https&st=2026-11-16T06%3A38%3A26Z&se=2026-11-16T07%3A38%3A26Z&sr=b&sp=r&sig=0VmI%2Bmpk0c8x%2BIhdfG2Dmky%2Bs7rT95GkoFhed0dVK8U%3D) ## Enable Syslog-NG By default, syslog-ng mode is disabled, while syslog is enabled. When syslog-ng mode is disabled, users see but cannot edit syslog-ng configuration options. Enabling syslog-ng mode allows users to access additional configuration options. Disabling syslog-ng mode resets all syslog-ng-specific configuration parameters to their default factory values. **To enable syslog-ng:** 1. Navigate to **System ▶ Agent ▶ Syslog**. 2. In **Syslog mode configuration**, check **syslog-ng mode**. 3. Click **Apply**. Enabling Syslog-NG Mode via CLI You can enable syslog-ng mode via the CLI by using the command `mode edit syslog-ng enable`. ## Configure Global System Log Settings **To configure global system log settings:** 1. Navigate to **System ▶ Agent ▶ Syslog**. 2. In **Syslog configuration**, complete the fields as required. For more information, see *Syslog Configuration Parameters*. 3. Click **Apply**. ## Configure Remote System Log Settings **To configure remote system log settings:** 1. Navigate to **System ▶ Agent ▶ Syslog**. 2. In **Remote syslog (number)**, complete the fields as required. For more information, see *Remote Syslog (Number) Parameters*. 3. Click **Apply**. ## Syslog Mode Configuration Parameters ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-66I0XV5S.png?sv=2026-02-06&spr=https&st=2026-11-16T06%3A38%3A26Z&se=2026-11-16T07%3A38%3A26Z&sr=b&sp=r&sig=1eYrtzhOdNcuJ87JTqnKIVfFOAr6gftdfkOI5f0HybQ%3D) | Parameter | Description | | --- | --- | | syslog-ng mode | Enable to access additional configuration options. Default setting: disabled. Disabling will reset unsupported syslog parameters and options to factory default. | ## Syslog Configuration Parameters ***Note:** Parameters may vary depending on the **syslog-ng mode** configuration.* ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-IBE1KCFD.png?sv=2026-02-06&spr=https&st=2026-11-16T06%3A38%3A26Z&se=2026-11-16T07%3A38%3A26Z&sr=b&sp=r&sig=NJ46HsuBmY%2BtDDLoqJYJwg0Tdc4K8Y6ogjQ8gU%2BoNKE%3D) | Parameter | Description | | --- | --- | | Facility configuration | Device facility to log all messages using a user-defined facility instead of the default ones. - LOCAL0 - LOCAL1 - LOCAL2 - LOCAL3 - LOCAL4 - LOCAL5 - LOCAL6 - LOCAL7 | | Level configuration | Global logging maximum severity level. 1. **Emergency**: system is unusable 2. **Alert**: action must be taken immediately 3. **Critical**: critical conditions 4. **Error**: error conditions 5. **Warning**: warning conditions 6. **Notice**: normal, but significant, condition (Default) 7. **Info**: informational message 8. **Debug**: debug-level message The level you choose enables all messages from the specified level and all messages from lower levels. | | Remote level configuration | Severity level of logs being sent to remote logging server. | | Protocol configuration | Streaming log protocol. - **Legacy** (Default) - **RFC-3164** - **RFC-5424** | ## Remote Syslog (Number) Parameters ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-0Q8HEWSQ.png?sv=2026-02-06&spr=https&st=2026-11-16T06%3A38%3A26Z&se=2026-11-16T07%3A38%3A26Z&sr=b&sp=r&sig=mZkVCohvQt2qqyE34vYsqhgs5ZnUcgQmIKXZWThLe7k%3D) | Parameter | Description | | --- | --- | | Enable | Enables or disables sending messages to this remote server. | | Log type | Type of logging application. | | Transport | Connection protocol used to communicate with remote logging server. - **TCP** - **UDP** (Default) - **TLS** | | Host configuration | Domain name or IP of remote logging server. Supported string-based formats: IPv4 address, IPv6 address, or hostname (FQDN). | | Port configuration | Port number of remote logging server. Supported range: 1...65535 Default value: 514 | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)