--- title: "Create a Network Partition Configuration in GUI Mode" slug: "creating-network-partition-configuration-in-gui-mode" tags: ["network partition", "partitioning", "Network Partitioning", "Legacy Orchestrator"] updated: 2026-07-07T14:04:45Z published: 2024-10-29T23:51:27Z canonical: "docs.crossworkassurance.cisco.com/creating-network-partition-configuration-in-gui-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a Network Partition Configuration in GUI Mode The following procedure explains how to create a network partition configuration in GUI mode. **To create a network partition configuration in GUI mode** 1. Access the **Network Partitions** page. 2. Click the **Add partition** ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-UCYGXH39.png?sv=2026-02-06&spr=https&st=2026-11-22T19%3A34%3A02Z&se=2026-11-22T20%3A34%3A02Z&sr=b&sp=r&sig=Zd%2BKtDzNFvS0ayyYqrGJzUbNVP9NPxfAYjkN3B8xUFk%3D) button. The **Network partition configuration** window is displayed. The **Users** tab is above. ![24.09_Creating Network Partition Configuration in GUI Mode_1.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/24.09_Creating%20Network%20Partition%20Configuration%20in%20GUI%20Mode_1.png?sv=2026-02-06&spr=https&st=2026-11-22T19%3A34%3A02Z&se=2026-11-22T20%3A34%3A02Z&sr=b&sp=r&sig=KRlm2emAXMypMDFnuLNdywSUJi5wtsmtGei4RPqgmOM%3D) 1. Enter a Partition name. 2. Drag the users that you want to assign to a partition from the left pane to the right pane titled **Users to be added**. 3. If you do not want to select target devices immediately, click **Apply** then **Close** to close the window. The new partition is added to the list. 4. Select the target devices: Drag the devices from the left pane (**Device selection**) to the right pane (**Target devices**). 5. Click **Apply**. 6. Click **Close** to close the **Network Partitions Configuration** window. 7. Click the **Refresh** ![image.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/image-X5PDYDHE.png?sv=2026-02-06&spr=https&st=2026-11-22T19%3A34%3A02Z&se=2026-11-22T20%3A34%3A02Z&sr=b&sp=r&sig=8K%2FFcwOYdmJwCongh3h2u020E0%2BPFUqWXgCJnEWDRrM%3D)button to refresh the user interface. **Network Partition Configuration (Network Partitions ▶ Add partitions button)** | Parameter | Description | | --- | --- | | Partition name | Name of the partition | **Users** tab | Parameter | Description | | --- | --- | | Name | The list of user name | **Device selection, Elements** tab | Parameter | Description | | --- | --- | | Name | Identifiers for the devices available for selection. Drag devices into the Target devices list. | | Label | User-defined label that will allow users to identify and group modules. | | Serial number | The serial number of the device. | | IP | The IP address of the device. | | MAC address | The MAC address of the device. | | Version | The current firmware version that runs the device. | | Model | The model of the device. | | Target devices | The list of devices selected for one of the user's assigned partitions. | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)