--- title: "Codec Parameters for MOS Calculation" slug: "codec-parameters-for-mos-scores" tags: ["Codec", "Default Parameters", "MOS", "PCA", "FAQ"] updated: 2026-06-01T17:39:58Z published: 2026-06-01T17:39:58Z canonical: "docs.crossworkassurance.cisco.com/codec-parameters-for-mos-scores" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt > Use this file to discover all available pages before exploring further. # Codec Parameters for MOS Calculation ## Overview MOS (**Mean Opinion Score**) is a standard for assessing quality of voice communication through subjective (human feedback) or algorithmic methods. More information can be found [here](https://en.wikipedia.org/wiki/Mean_opinion_score). Cisco Crosswork Assurance supports calculation of synthetic MOS based on ITU-T Wideband E-model G.107.1 pre-2019 (algorithmic), accounting for wideband codecs such as G.722 AMR and allowing an R-scale of up to 129 (MOS 1.0 - 5.0). A later addition to the E-model was presented by ITU-T in 2019 which moves R-scale max to 148 for full-band MOS. This is not supported in Cisco Crosswork Assurance. MOS (and R) is reported for TWAMP, UDP- and ICMP echo sessions generated by the following actuators: - **Cisco® Crosswork Assurance Sensor Control** locally generated (i350 PCI-passthrough or through vSwitch) - **Cisco® Assurance SFP** NFV-PM - **Cisco® Crosswork Assurance Sensor Agents** actuate For the Sensor Control and Cisco Assurance SFP sessions, the settings for MOS codec calculation is completed on sensor orchestration capabilities within Crosswork Assurance, globally for all sessions on the system. The default codec emulation is G.711. For Sensor Agents, the settings are configurable per-session, with default again being G.711. The parameter setting UI can be seen in the screenshot below: **MOS loss robustness factor** and **MOS equipment impairment factor**. ![25.07_Codec parameters for MOS calculation_1 - edited.png](https://cdn.document360.io/01d1de5e-a375-4fbc-aa82-666ac04c2113/Images/Documentation/25.07_Codec%20parameters%20for%20MOS%20calculation_1%20-%20edited.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A29%3A24Z&se=2026-11-22T15%3A29%3A24Z&sr=b&sp=r&sig=YxlNZXrnej6PuOiiM2UcQUrDT9PpY4vzyMMzQrLm1Y0%3D) ## Codec Variants and Their Impairment Parameters Use the table below to find suitable values for loss robustness and equipment impairment based on the codec variant that should be emulated. --- | codec name | loss robustness factor (Bpl) | equipment impairment factor (Ie) | | --- | --- | --- | | EVS SWB 48kbps | 9.6 | 10.2 | | EVS SWB 32kbps | 9.3 | 8.7 | | EVS SWB 24.4kbps | 11.4 | 7.2 | | EVS SWB 16.4kbps | 10.3 | 10.8 | | EVS SWB 13.2kbps | 11.7 | 17.1 | | EVS SWB 9.6kbps | 13 | 22.7 | | G.722-hq | 7.1 | 5 | | G.722-lc | 5.1 | 5 | | G.722.2 23kbps (AMR-WB) | 4.6 | 8 | | G.722.2 12kbps (AMR-WB) | 4.3 | 20 | | G.729.1 32kbps | 6.1 | 7 | | G.729.1 24kbps | 7.3 | 16 | | G.711 | 25.1 | 35.8 | | G.723.1 | 16.1 | 50.8 | | G.729 / G.729a | 19.0 | 46.8 | | GSMEfr (AMR-NB) | 10.0 | 40.8 | | GSMHr | 10.0 | 58.8 | **© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)