---
title: "snmp-trap"
slug: "cli-sc-snmp-trap"
updated: 2025-07-02T03:30:27Z
published: 2025-09-03T14:11:33Z
canonical: "docs.crossworkassurance.cisco.com/cli-sc-snmp-trap"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# snmp-trap

## snmp-trap edit auto

snmp-trap edit auto - Edit automatic SNMP trap handler configuration

**Description:** This command allows you to change the automatic SNMP trap handler configuration.

**Syntax:**

```
  snmp-trap edit auto {
        {host-state {enable | disable}} |
        {host-community <string>} |
        {host-port <1-65535>}
        {trap-version {v1 | v2c}}
        {host-name-refresh}
        }+
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| host-state | Enable/Disable the sending of SNMP traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-port | This command defines the UDP port to use when sending SNMP traps (the well-known SNMP trap port 162 is used by default). |
| trap-version | Set the version (v1 or v2c) of the configured host SNMP traps. |
| host-name-refresh | Refresh of the configured host name for SNMP traps. |

## snmp-trap edit v1

snmp-trap edit v1 - Edit SNMP v1 trap handler configuration

**Description:** This command allows you to change the SNMP v1 trap handler configuration.

**Syntax:**

```
  snmp-trap edit v1 <host-id> {
        {host-state {enable | disable}} |
        {host-community <string>} |
        {host-name <string>} |
        {host-port <1-65535>}}+
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| host-state | Enable/Disable the sending of traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-name | This command defines the host name or IP address of the server to which the traps (and/or inform notifications) are sent. The unit sends a Cold Start trap when it starts and upon authentication failure. |
| host-port | This command defines the UDP port to use when sending traps (the well-known SNMP trap port 162 is used by default). |

## snmp-trap edit v2c

snmp-trap edit v2c - Edit SNMP v2c trap handler configuration

**Description:** This command allows you to change the SNMP v2c trap handler configuration.

**Syntax:**

```
  snmp-trap edit v2c <host-id> {
        {host-state {enable | disable}} |
        {host-community <string>} |
        {host-name <string>} |
        {host-port <1-65535>}}+
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| host-state | Enable/Disable the sending of traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-name | This command defines the host name or IP address of the server to which the traps (and/or inform notifications) are sent. The unit sends a Cold Start trap when it starts and upon authentication failure. |
| host-port | This command defines the UDP port to use when sending traps (the well-known SNMP trap port 162 is used by default). |

## snmp-trap show

snmp-trap show - Show SNMP trap handler configuration

**Description:** snmp-trap show displays the SNMP trap handler configuration.

**Syntax:**

```
  snmp-trap show
```

**© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)