---
title: "route"
slug: "cli-sc-route"
updated: 2025-07-02T02:55:55Z
published: 2025-09-03T14:11:33Z
canonical: "docs.crossworkassurance.cisco.com/cli-sc-route"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# route

## route add/edit and route ipv6 add/edit

route add - Add a new IPv4 route route edit - Edit an existing IPv4 route route ipv6_add - Add a new IPv6 route route ipv6_edit - Edit an existing IPv6 route

**Description:** The route add/edit or ipv6_add/ipv6_edit command lets you add or modify the IPv4 or IPv6 system routing table.

**Syntax:**

```
  route {add|edit} <route-name> { {type {host | net}} |
                                  {destination <ip-addr>} |
                                  {netmask <ip-addr>} |
                                  {gateway <ip-addr>} |
                                  {interface <interface-name>}
                                  {vce <vce-name>} }+

  route {ipv6_add|ipv6_edit} <route-name> {
                                  {destination <ipv6-addr>/<ipv6-prefixLen>} |
                                  {gateway <ipv6-addr>} |
                                  {interface <interface-name>} }+
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| <route-name> | <string> The name of the route. It can be a brief description of the route, e.g., "Default". |
| <interface-name> | <string> The interface with which the route is associated. This is only for specific situations when a target exists on a different network for that interface. In most situations, the interface is determined automatically. To associate the route to a remote device, you must specify a remote interface. |
| type | Route type may either be Network for a range of addresses or Host for a specific IP address. |
| destination | Network or host address of the route. Use 0.0.0.0 (for IPv4) or ::/0 (for IPv6) to denote the default route. |
| netmask | Mask assigned to the route. Only used for network routes. |
| gateway | Gateway address associated with this route or default gateway address. |
| interface | The interface with which the route is associated. This is only for specific situations when a target exists on a different network for that interface. In most situations, the interface is determined automatically. To associate the route to a remote device, you must specify a remote interface. |
| vce | The vce (instead of an interface) with which the route is associated. |

## route delete and route ipv6 delete

route delete - Delete an existing IPv4 route route ipv6_delete - Delete an existing IPv6 route

**Description:** The route delete or ipv6_delete commands let you delete configured IPv4 or IPv6 routes in the system.

**Syntax:**

```
  route {delete|ipv6_delete} <route-name>
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| <route-name> | <string> |

## route and route ipv6 show active/configuration

route show configuration - Display statically configured IPv4 routes route show active - Display active IPv4 routes route ipv6_show configuration - Display statically configured IPv6 routes route ipv6_show active - Display active IPv6 routes

**Description:** The route show or route ipv6_show commands let you show active and configured IPv4 or IPv6 routes in the system.

**Syntax:**

```
  route show active [<vce-name>]
  route ipv6_show active
  route {show|ipv6_show} [configuration [<route-name>]]
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| <vce-name> | <string> |
| <route-name> | <string> |

**© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)