---
title: "radius"
slug: "cli-sc-radius"
updated: 2025-07-01T08:07:46Z
published: 2025-09-03T14:11:33Z
canonical: "docs.crossworkassurance.cisco.com/cli-sc-radius"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.crossworkassurance.cisco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# radius

## radius edit

radius edit - Allows you to edit the RADIUS configuration on the Sensor Control

**Description:** radius edit allows you to change RADIUS parameters required to authenticate, authorize and possibly perform accounting in the future.

**Note:** The new parameters are only effective on the next login attempt.

**Syntax:**

```
  radius edit {
    {auth-method {pap | chap | ms-chap | ms-chap2}} |
    {auth-server1 {<ip-addr> | <dns-name>}} |
    {auth-server1-port <decimal>} |
    {auth-server1-secret <string>} |
    {auth-server2 {<ip-addr> | <dns-name>}} |
    {auth-server2-port <decimal>} |
    {auth-server2-secret <string>} |
    {radius-timeout <decimal>} |
    {radius-retries <decimal>} |
    {realm <string>} }+
```

**Parameters:**

| Parameter | Description |
| --- | --- |
| auth-method | Authentication method to use. |
| auth-server1 | RADIUS server to authenticate to. |
| auth-server1-port | RADIUS server UDP port to connect to. |
| auth-server1-secret | Shared secret for server1. |
| auth-server2 | Used only if first server does not respond. |
| auth-server2-port | RADIUS server UDP port to connect to. |
| auth-server2-secret | Shared secret for server2. |
| radius-timeout | Time to wait for the RADIUS server to respond before retrying connection. After the number of retries has been exhausted, a connection to the next configured server will be attempted, in which the same timeout and retry scheme will apply. |
| radius-retries | Number of times to retry the server before trying the next configured server. |
| realm | Append this to user name. Mostly left blank. |

## radius show

radius show - Show the RADIUS configuration applied to the Sensor Control

**Description:** Show the RADIUS configuration.

**Syntax:**

```
  radius show
```

**© 2026 Cisco and/or its affiliates. All rights reserved.** For more information about trademarks, please visit: [Cisco trademarks](https://www.cisco.com/c/en/us/about/legal/trademarks.html)[](https://www.cisco.com/c/en/us/about/legal/trademarks.html) For more information about legal terms, please visit: [Cisco legal terms](https://www.cisco.com/c/en/us/about/legal/terms-conditions.html)